Remotus T-Rx 1500
Receiver for safe control of various mobile applications.
The T-Rx 1500 receiver has up to 24 digital outputs or 16 PWM outputs. The system can also be used for mounting remote control on front end loaders, excavators and mobile cranes. The system is made to handle tough conditions like wide fluctuations in temperature, dust, vibrations, oil and humidity.
Remotus T-Rx 1500 has a shock resistant and waterproof aluminium enclosure. It has double safety outputs and a very high degree of security for radio transmissions. The receiver has dual microprocessors that monitor each other. Every transmission is checked before the function is activated and diagnostic testing is done during operation. The emergency stop function is certified to EN ISO 13849-1, Cat 3 PLd.
Driving characteristics and statistics
Personal settings or suitable driving characteristics such as start speed and maximum speed or joystick sensitivity can easily be set with software that can be run on an ordinary PC. The receiver’s diagnostic function simplifies troubleshooting.
|Fieldbus||CAN Open 2.0, SAE J1939|
|I/O||Digital: Max. 24 3A powered per output. 8 are always outputs.|
|16 share function with PWM outputs.|
|PWM||Max. 16 3A powered per output, 50-400 Hz, 12-bit resolution.|
|Analogue||8 0-10V or 0-20mA, 12-bit resolution|
|10V Ref||10V, 100mA power supply for sensors, potentiometer etc.|
|Stop outputs||Dual safety outputs (RCSS), safety parameters per EN ISO 13849-1: Cat 3, Pl d|
|Connector||AMP MCP 62-pin|
|Radio frequency||433-434 MHz|
|Power consumption||ca 1.2 W|
|Temperature range||-25°C - +70°C|
|Dimensions||218 x 174 x 64 mm|
|Supply voltage||12/24V DC, negative earth system|